Main features >> Installation
Installation

In 3 steps only and without pressing tools.

Note that although the installation process is quick and simple the following instructions are always to be observed and compulsory in order to carry out a proffessional installation.

1. Cut the desired pipe length by making a perpendicular cut (90º angle). This operation is easily done with a pipe cutter.

2. Bevel / calibrate / chamfer the pipe end. Two or three strokes with the appropriate bevelling tool should be enough. Make sure that the pipe end has been beveled both inner and outter layer.

3. Insert the beveled pipe end into the fitting until it stops and look through the inspection window to ensure that the pipe is fully home.

This operation requires a minimum effort, since all fittings contain silicone grease to make insertion easier. This grease is temperature-resistant, specially designed for drinking water and it does not dry out.

CSS / Diseño: INDEX - JMA